Byrd Tool Shelix Cutterhead for Grizzly G5850Z 20" planer 5 HP

28.2.13 Posted by Sale

Byrd Tool Shelix Cutterhead for Grizzly G5850Z 20" planer 5 HP for Sale - Review & Buy at Cheap Price





List Price : $1,395.00






Price : $1,395.00










Byrd Tool Shelix Cutterhead for Grizzly G5850Z 20" planer 5 HP Feature | Sale - Review & Buy at Cheap Price


  • Spiralled Stagger Tooth- to break up chips fpr dust collection
  • Shear- to give clean cutting action Helix to assist the chip flow
  • 2.5mm thick knives (Most are 1.5mm)
  • Extremely quiet cut Greatly reduced tearout
  • rotate cutters when dull Replace only 2-3 cutters if they hit steel





Byrd Tool Shelix Cutterhead for Grizzly G5850Z 20" planer 5 HP Feature for Sale - Review & Buy at Cheap Price


  • Spiralled Stagger Tooth- to break up chips fpr dust collection
  • Shear- to give clean cutting action Helix to assist the chip flow
  • 2.5mm thick knives (Most are 1.5mm)
  • Extremely quiet cut Greatly reduced tearout
  • rotate cutters when dull Replace only 2-3 cutters if they hit steel

[if SHELIX FOR GRIZZLY G5850/G5850Z/G0544 **SEVERAL VARIATIONS MADE** The ORIGINAL SHEar & heLIX and spiral cutter non-grind design.Woodworkers know that a shear cut is far better than a straight cut.You also know that a stagger cut is much better than just a singlestraight knife and is a lot easier on your dust collection system. If youjust happen to plane a nail or staple, it is not necessary to replaceexpensive knives the full length of your planer head. Replace 2 or 3 smallinexpensive knives and you are ready to go. The SHELEX is extremely quiet compared to other blades.]

Byrd Tool Shelix Cutterhead for Grizzly G5850Z 20" planer 5 HP Overview for Sale - Review & Buy at Cheap Price


SHELIX FOR GRIZZLY G5850/G5850Z/G0544 **SEVERAL VARIATIONS MADE** The ORIGINAL SHEar & heLIX and spiral cutter non-grind design.Woodworkers know that a shear cut is far better than a straight cut.You also know that a stagger cut is much better than just a singlestraight knife and is a lot easier on your dust collection system. If youjust happen to plane a nail or staple, it is not necessary to replaceexpensive knives the full length of your planer head. Replace 2 or 3 smallinexpensive knives and you are ready to go. The SHELEX is extremely quiet compared to other blades.


Byrd Tool Shelix Cutterhead for Grizzly G5850Z 20" planer 5 HP Specifications



Byrd Tool Shelix Cutterhead for Grizzly G5850Z 20" planer 5 HP SHELIX FOR GRIZZLY G5850/G5850Z/G0544 **SEVERAL VARIATIONS MADE** The ORIGINAL SHEar & heLIX and spiral cutter non-grind design.Woodworkers know that a shear cut is far better than a straight cut.You also know that a stagger cut is much better than just a singlestraight knife and is a lot easier on your dust collection system. If youjust happen to plane a nail or staple, it is not necessary to replaceexpensive knives the full length of your planer head. Replace 2 or 3 smallinexpensive knives and you are ready to go. The SHELEX is extremely quiet compared to other blades.


Reviews More...


Available at Amazon Check Price Now!




*** Product Information and Prices Stored: Feb 28, 2013 23:30:03








Tags : Sale Laptop online carbide jointer knives hifonics xxv maxximus subwoofer samsung galaxy bluetooth

JET 708524 JPM-13CS 13-Inch 1-1/2-Horsepower Planer/Molder, 110/230-Volt 1-Phase

13.2.13 Posted by Sale

JET 708524 JPM-13CS 13-Inch 1-1/2-Horsepower Planer/Molder, 110/230-Volt 1-Phase for Sale - Review & Buy at Cheap Price





List Price : $1,329.00






Price : $1,119.99










JET 708524 JPM-13CS 13-Inch 1-1/2-Horsepower Planer/Molder, 110/230-Volt 1-Phase Feature | Sale - Review & Buy at Cheap Price


  • Sturdy cast-iron table
  • Reduced vibration
  • Adjustable infeed/outfeed
  • Motor located at base
  • Comes with stand





JET 708524 JPM-13CS 13-Inch 1-1/2-Horsepower Planer/Molder, 110/230-Volt 1-Phase Feature for Sale - Review & Buy at Cheap Price


  • Sturdy cast-iron table
  • Reduced vibration
  • Adjustable infeed/outfeed
  • Motor located at base
  • Comes with stand

[if

Boasting a 1-1/2-horsepower motor, the Jet 708524 JPM-13CS planer/molder produces a superior finish with its three-cutter head design and can handle material up to 13 inches wide and up to 6 inches in height. A sturdy cast-iron table and base provide strength and reduce vibration during use, and built-in lockable casters add support and stability while allowing easy maneuverability.

Jet 708524
Designed and built with the home woodworking shop in mind (view larger).
At a Glance
708524 JPM-13CS
13-Inch Planer/Molder
At a Glance:
  • Totally enclosed fan-cooled 1-1/2-horsepower motor

  • Three-cutter head design produces a superior finish

  • Molding cutter head accommodates more than 40 standard molding cutter sets

  • Adjustable, rubber-coated infeed and outfeed rollers won't mar wood

  • Top-mounted height adjustment handle

  • Five-year limited warranty
At a Glance

Power Base for Home Woodworking

Designed and built with the home woodworking shop in mind, the Jet 708524 JPM-13CS has a totally enclosed 1-1/2-horsepower, 115-volt motor that can easily be rewired to 230 volts. The motor delivers its power to the cutterhead assembly through a pair of V-belts running in precision-machined multi-groove pulleys. A removable side door on the cabinet provides access to the motor and its belt-tensioning mount should adjustment become necessary in the future.

Superior Cutting and Feeding

The JPM-13CS features an all-steel, precision-machined cutterhead (2-9/16-inch diameter) fitted with three full-width knives. The knives are retained by three-piece wedge-shaped gibs that allow for the installation of many molding-knife profiles without removing the planer blades. The center gib section makes installing most molding knives easy (2 inches wide and under).

The planer/molder has two feed rates, with the high 20 FPM (feet per minute) setting used primarily for dimensioning wood when lots of material is being removed quickly. The 10 FPM speed is used for finish cuts when the smoothest possible surface is desired, and this slower feed rate is also used for molding operations.

Rubber-covered infeed and outfeed rollers keep the stock moving at a consistent pace, and the rubber feed roller surface gets a good grip on the wood without marring the profiled surface of molded wood. Both of the feed rollers are easily adjustable to maintain their performance.

Generously Sized, High-Quality Table

The cast-iron table lends plenty of heft and contact surface, measuring 19-1/4 inches long by 14 inches wide. The table has 6 inches of travel maintained by lead screws on either side and is driven by an easy-to-use hand crank on top of the machine. Handy metric and inch scales flank the infeed housing opening to make adjusting cut depth simple and accurate. It comes with an incorporated dust chute--so it's simple to hook up to a dust collector and keep the shop clean. Four lockable casters (not standard) make it easy to maneuver the tool in a tight shop. It's backed by a five-year limited warranty.

5-year warranty

What's in the Box

One Jet 708524 JPM-13CS planer/molder, and operating and assembly instructions.

Specifications

  • Motor: 1-1/2 horsepower, 1 phase, 115/230 volt
  • Maximum planing width: 13 inches
  • Maximum planing thickness: 6-1/8 inches
  • Maximum planing length: 14 inches
  • Cutterhead: 4,500 rpm speed, 2-9/16-inch diameter
  • Cuts per minute: 13,500
  • Feed rate: 20 feet per minute (FPM) planing; 10 FPM molding
  • Dimensions: 24 inches by 25 inches by 41 inches
  • Weight: 258 pounds
  • Warranty: 5-year, limited

]

JET 708524 JPM-13CS 13-Inch 1-1/2-Horsepower Planer/Molder, 110/230-Volt 1-Phase Overview for Sale - Review & Buy at Cheap Price


Boasting a 1-1/2-horsepower motor, the Jet 708524 JPM-13CS planer/molder produces a superior finish with its three-cutter head design and can handle material up to 13 inches wide and up to 6 inches in height. A sturdy cast-iron table and base provide strength and reduce vibration during use, and built-in lockable casters add support and stability while allowing easy maneuverability.

Jet 708524
Designed and built with the home woodworking shop in mind (view larger).
At a Glance
708524 JPM-13CS
13-Inch Planer/Molder
At a Glance:
  • Totally enclosed fan-cooled 1-1/2-horsepower motor

  • Three-cutter head design produces a superior finish

  • Molding cutter head accommodates more than 40 standard molding cutter sets

  • Adjustable, rubber-coated infeed and outfeed rollers won't mar wood

  • Top-mounted height adjustment handle

  • Five-year limited warranty
At a Glance

Power Base for Home Woodworking

Designed and built with the home woodworking shop in mind, the Jet 708524 JPM-13CS has a totally enclosed 1-1/2-horsepower, 115-volt motor that can easily be rewired to 230 volts. The motor delivers its power to the cutterhead assembly through a pair of V-belts running in precision-machined multi-groove pulleys. A removable side door on the cabinet provides access to the motor and its belt-tensioning mount should adjustment become necessary in the future.

Superior Cutting and Feeding

The JPM-13CS features an all-steel, precision-machined cutterhead (2-9/16-inch diameter) fitted with three full-width knives. The knives are retained by three-piece wedge-shaped gibs that allow for the installation of many molding-knife profiles without removing the planer blades. The center gib section makes installing most molding knives easy (2 inches wide and under).

The planer/molder has two feed rates, with the high 20 FPM (feet per minute) setting used primarily for dimensioning wood when lots of material is being removed quickly. The 10 FPM speed is used for finish cuts when the smoothest possible surface is desired, and this slower feed rate is also used for molding operations.

Rubber-covered infeed and outfeed rollers keep the stock moving at a consistent pace, and the rubber feed roller surface gets a good grip on the wood without marring the profiled surface of molded wood. Both of the feed rollers are easily adjustable to maintain their performance.

Generously Sized, High-Quality Table

The cast-iron table lends plenty of heft and contact surface, measuring 19-1/4 inches long by 14 inches wide. The table has 6 inches of travel maintained by lead screws on either side and is driven by an easy-to-use hand crank on top of the machine. Handy metric and inch scales flank the infeed housing opening to make adjusting cut depth simple and accurate. It comes with an incorporated dust chute--so it's simple to hook up to a dust collector and keep the shop clean. Four lockable casters (not standard) make it easy to maneuver the tool in a tight shop. It's backed by a five-year limited warranty.

5-year warranty

What's in the Box

One Jet 708524 JPM-13CS planer/molder, and operating and assembly instructions.

Specifications

  • Motor: 1-1/2 horsepower, 1 phase, 115/230 volt
  • Maximum planing width: 13 inches
  • Maximum planing thickness: 6-1/8 inches
  • Maximum planing length: 14 inches
  • Cutterhead: 4,500 rpm speed, 2-9/16-inch diameter
  • Cuts per minute: 13,500
  • Feed rate: 20 feet per minute (FPM) planing; 10 FPM molding
  • Dimensions: 24 inches by 25 inches by 41 inches
  • Weight: 258 pounds
  • Warranty: 5-year, limited




JET 708524 JPM-13CS 13-Inch 1-1/2-Horsepower Planer/Molder, 110/230-Volt 1-Phase Specifications



JET 708524 JPM-13CS 13-Inch 1-1/2-Horsepower Planer/Molder, 110/230-Volt 1-Phase

Boasting a 1-1/2-horsepower motor, the Jet 708524 JPM-13CS planer/molder produces a superior finish with its three-cutter head design and can handle material up to 13 inches wide and up to 6 inches in height. A sturdy cast-iron table and base provide strength and reduce vibration during use, and built-in lockable casters add support and stability while allowing easy maneuverability.

Jet 708524
Designed and built with the home woodworking shop in mind (view larger).
At a Glance
708524 JPM-13CS
13-Inch Planer/Molder
At a Glance:
  • Totally enclosed fan-cooled 1-1/2-horsepower motor

  • Three-cutter head design produces a superior finish

  • Molding cutter head accommodates more than 40 standard molding cutter sets

  • Adjustable, rubber-coated infeed and outfeed rollers won't mar wood

  • Top-mounted height adjustment handle

  • Five-year limited warranty
At a Glance

Power Base for Home Woodworking

Designed and built with the home woodworking shop in mind, the Jet 708524 JPM-13CS has a totally enclosed 1-1/2-horsepower, 115-volt motor that can easily be rewired to 230 volts. The motor delivers its power to the cutterhead assembly through a pair of V-belts running in precision-machined multi-groove pulleys. A removable side door on the cabinet provides access to the motor and its belt-tensioning mount should adjustment become necessary in the future.

Superior Cutting and Feeding

The JPM-13CS features an all-steel, precision-machined cutterhead (2-9/16-inch diameter) fitted with three full-width knives. The knives are retained by three-piece wedge-shaped gibs that allow for the installation of many molding-knife profiles without removing the planer blades. The center gib section makes installing most molding knives easy (2 inches wide and under).

The planer/molder has two feed rates, with the high 20 FPM (feet per minute) setting used primarily for dimensioning wood when lots of material is being removed quickly. The 10 FPM speed is used for finish cuts when the smoothest possible surface is desired, and this slower feed rate is also used for molding operations.

Rubber-covered infeed and outfeed rollers keep the stock moving at a consistent pace, and the rubber feed roller surface gets a good grip on the wood without marring the profiled surface of molded wood. Both of the feed rollers are easily adjustable to maintain their performance.

Generously Sized, High-Quality Table

The cast-iron table lends plenty of heft and contact surface, measuring 19-1/4 inches long by 14 inches wide. The table has 6 inches of travel maintained by lead screws on either side and is driven by an easy-to-use hand crank on top of the machine. Handy metric and inch scales flank the infeed housing opening to make adjusting cut depth simple and accurate. It comes with an incorporated dust chute--so it's simple to hook up to a dust collector and keep the shop clean. Four lockable casters (not standard) make it easy to maneuver the tool in a tight shop. It's backed by a five-year limited warranty.

5-year warranty

What's in the Box

One Jet 708524 JPM-13CS planer/molder, and operating and assembly instructions.

Specifications

  • Motor: 1-1/2 horsepower, 1 phase, 115/230 volt
  • Maximum planing width: 13 inches
  • Maximum planing thickness: 6-1/8 inches
  • Maximum planing length: 14 inches
  • Cutterhead: 4,500 rpm speed, 2-9/16-inch diameter
  • Cuts per minute: 13,500
  • Feed rate: 20 feet per minute (FPM) planing; 10 FPM molding
  • Dimensions: 24 inches by 25 inches by 41 inches
  • Weight: 258 pounds
  • Warranty: 5-year, limited




Reviews More...


Available at Amazon Check Price Now!




*** Product Information and Prices Stored: Feb 13, 2013 22:15:03








Friends Link : Sale online nintendo 3ds eshop codes adidas shoe on sale